Show Me How Programme

Sponsored by:

All times displayed for Europe/London timezone.

Ajax, Wireless Security System
10:00 - 16:00 Stand B430
session

The Ajax system can be controlled using a mobile application, and there is a separate app for installers and security companies. Devices fit in with any interior, due to their elegant design. And system installation and configuration takes under an hour. It can connect to all popular central monitoring stations using the ContactID protocol.

The hub communicates with up to 100 detectors at a distance of up to 2000 meters. The devices each have a stock battery life of 5-7 years. The hub can run on backup power for up to 15 hours and uses two communication channels, Ethernet and GSM. It is secured with anti-sabotage and anti-jamming systems, encrypted channels and authentication.

Demos will be rolling all day and can be requested on demand.

Alertus Technologies, Emergency Mass Notification System
10:00 - 16:00 Stand E117
session

How the Alertus System can unify and leverage existing IP and hardware assets to deliver an intelligent emergency response and crisis communication system.

Demonstrations will be running each day at 11:30am and 2:30pm.

Arecont Vision, MegaDome G3 RS, SurroundVideo Omni G3
10:00 - 17:00 Stand D400
session
VP of Product Development
Arecont Vision

Visitors will learn how to easily install and perform a “no-touch” remote setup on both the single-sensor MegaDome G3 RS and multi-sensor SurroundVideo Omni G3 models. This live demo will also cover the 180?, 270?, or 360? preset views that can be selected on the Omni G3 as well as how to position each of the sensors remotely, including remote focus, zoom, and tilt. All can be done without requiring the time and cost of manually mounting a ladder or lift to remove and then replace the dome bubble after adjusting the aim of the sensors, or shifting the entire camera.

Demonstrations will be running on Tuesday 19th June and Wednesday 20th June at 12:00pm.

Commend, Dynamic Lockdown Solution
10:00 - 16:00
session

The visitors will be able to visualise how the lockdown leader can control remotely the different modules/elements deployed across a site to achieve a partial or full lockdown of a site. They will witness how, from the touch of a button, the staff is able to make announcements, lock/unlock specific doors, control lifts, etc. whilst also being made aware of any fire alarms being activated.

Demonstrations will be rolling throughout the event and can be requested on demand.

Inner Range, Inception
10:00 - 16:00 Stand F410
session

How to configure web-based access control from “out of the box”

Visitors will learn how quick and easy it is to configure our integrated web-based access control and security system from straight “out of the box” to a programmed state. They will be able to see this done by direct network or Wi-Fi browser connections.

Demos will be rolling all day, and can be requested on demand.

NSI, User-focused design - update on NSI's NCP 104 Code of Practice for CCTV Systems
10:00 - 17:00 Stand F538
session

• Update on standards associated with video surveillance
• Revision of the processes necessary to provide an effective solution
• Additional requirements to be considered during system design

Demonstrations will be running on Tuesday 19th and Wednesday 20th June at 11:30am.

Squire, INIGMA
10:00 - 16:00 Stand H518
session

The new INIGMA security system developed by SQUIRE will provide the basis for a wide range of ground-breaking electronic security products which provide extremely high security, state of the art wireless remote control and comprehensive sharing, monitoring and audit trail features. Our first Inigma product - the BL1 Bike Lock - combines Sold Secure Gold standard for physical security with our brand new INIGMA electronic access control system.

Demonstrations will be running throughout the event and can be requested on demand.

Seagate, SkyHawk HDD with Health Management Software and Rescue Services
10:00 - 16:00 Stand C440
session
CTS Engineer
Seagate
Senior CTS Engineer
Seagate

Seagate will present how CCTV Installers & Integrators can look after their Customers' Surveillance Systems helping to Safeguard Critical Video footage.
• Visitors will learn hands-on how to:
• Correctly configure and optimize NVR storage using Hikvision unit and SkyHawk drives
• Safely handle the Hard Drives during installation
• Prevent downtime using SkyHawk Health Management software
• Protect the CCTV Data using Seagate Rescue Data Recovery services

Sessions will be running each day at 11:00am, 1:00pm and 3:00pm.

Secure Logiq, Logiqal Healthcheck Pro incorporating Logiqal Cybercheck
10:00 - 16:00
session
Founder and Executive Director
Secure Logiq
Chief Technical Officer
Secure Logiq

Secure Logiqs free and intuitive software allows the security integrator to monitor the health of their enterprise CCTV systems from a single point or mobile device and raises alerts if any processes or components are under duress or have failed. Logiqal Cybercheck guides the integrator through the steps required to protect their CCTV installations from cyber-attack, automating the process making complete cyber protection easy without advanced IT skills.

Demonstrations will be running throughout the event, and can be requested on demand.

TiSO, New mechanism of tripod turnstiles
10:00 - 16:00 Stand G110
session

The turnstiles of tripod series manufactured by TiSO company have long established themselves on the market. But there is always something to achieve and to improve.
Therefore, our engineer developed a new drive mechanism for tripod turnstiles.

Demonstrations will be running throughout the event, and can be requested on demand.

ZKTeco, BioOnCard
10:00 - 16:00
session

BioOnCard is ZKTeco’s new Fingerprint on Proxcard combined solution. Specifically designed for Companies that sell RFID for physical and logical access control, for our clients with RFID already in place, proximity cards distribution companies, and also for access control manufacturers interested in offering a fingerprint solution but wanting to avoid the costly investment of integrating biometrics to their existing proximity systems.

Demonstrations will be running throughout the event, and can be requested on demand.

ZKTeco, Hi-FACE
10:00 - 16:00
session

Hi-FACE is a new revolutionary High-Speed Facial Recognition Android Cloud Based Platform. The applications of this system are endless, as it can be used for T&A, Access control, Video Surveillance Attendance Management, and Data Analysis solutions. Facial registrations can be managed through the system, mobile or tablet in real-time. Don’t miss the opportunity to be shown a solution which is set to pioneer the innovational technology of facial recognition!

Demonstrations will be running throughout the event, and can be requested on demand.

Axis Communications, Axis Integrator Suite
10:00 - 16:00 D340
session

You will learn how the Axis Integrator Suite can reduce the time required to design, install and manage your security solution. You will see how time savings can be achieved through allowing the integrator suite to automate time consuming tasks.

Demonstrations will be running throughout the event, and can be requested on demand.

ZKTeco, LPRS 1000
10:00 - 16:00
session

LPRS1000 is ZKTeco’s newly released License Plate Recognition System. It adopts a set of independently researched and developed top-class license plate recognition algorithms combined with years of experience in industry application. Simple, intelligent, open platform intelligence that can identify license plates from over 60 countries worldwide. Then system is available for integrators, or as an all-in-one solution with ZKTeco’s own software and parking barrier solutions.
LPRS1000 comes integrated with a license plate recognition camera, LED display, voice broadcast, fill light, fixed base and other integrated structure, and has a simple and elegant appearance and multi-functional design.

Demonstrations will be running throughout the event, and can be requested on demand.

Cisco Meraki, MV12 camera with built-in analytics
10:00 - 16:00 D520
session
Product Manager
Cisco Meraki

Visitors will learn about the unique Meraki MV12 solution and architecture. They’ll see a live demo of this product, which can perform advanced analytics at the edge (on the camera itself) with no servers.

Demonstration times TBC.

DJI, M210 drone with Zenmuse XT2 thermal camera and spotlight payload
10:00 - 16:00 H442
session

Visitors will learn how they can utilize drones for their security or surveillance operations.

The DJI M210 with XT2 thermal camera allows you to easily spot potential intruders during the night and you can reveal the person through a spotlight.

Demonstration times TBC.

DJI, Wind 8 drone with drop box
10:00 - 16:00 H442
session

Visitors will learn how they can utilize drones for their security or surveillance operations.

DJI Wind 8 can withstand strong winds and it can carry huge amount of weigh through its drop box.

Demonstration times TBC.

DJI, Aeroscope (mobile) drone detection
10:00 - 16:00 H442
session

Visitors will learn how they can utilize drones for their security or surveillance operations.

DJI Aeroscope can detect DJI drones from a far distance and alert security officials when they are entering a certain zone. While it can only detect DJI drones majority of the drones used today are from DJI (70% of the market share) also there is no solution yet in the market that can detect any kind of drone. 

Demonstration times TBC.

Hanwha, Wisenet software, technology and smart solutions
10:00 - 16:00 D100
session
Technical Manager
Hanwha
Technical Manager
Hanwha
Product Manager
Hanwha
European Product Manager
Hanwha

Hanwha Techwin will present Wisenet Software, New Products & Smart Solutions:

  • WISENET WAVE - Intuitive software allows you to ‘drag & drop; swipe & crop’ making it simple to set up single screen displays or video walls, with customisable layouts and sizes.
  • LIVE DARK ROOM - Low light & thermal cameras in action
  • SMART TRANSPORT - Mobile hardware & SSM Transport software
  • SMART RETAIL - Biometrics; Heat Map; People Counting; Queue Management 
  • SMART CITY - Automatic Incident Detection; Traffic Management; Intrusion

Demonstration times TBC.

SALTO, access control and software products
10:00 - 16:00 G100
session

SALTO Systems are world leaders in wire free, wireless, mobile and cloud based access control solutions. See how easy it is to manage a building or group of buildings in multiple locations or remote sites simply and effectively. We can integrate our access control solution with your CCTV, alarm, time and attendance or other systems as required. SALTO eliminates the need to replace locks and allows key cards and locks to be simply and quickly updated, restricted or deleted on the move. So whatever you want to secure and control, – SALTO Systems can do it all.

Demonstrations will be running throughout the event, and can be requested on demand.

Suzhou Keda Technology, Mobile Solutions
10:00 - 16:00 C400
session
Pre-sales Technical Engineer
Suzhou Keda Technology
Mobile Solution Technical Director
Suzhou Keda Technology
Pre-sales Technical Engineer
Suzhou Keda Technology

We are probably the first and only provider to supply a total solution for mobile application, visitors can learn how our command center manage body-worn cameras, mobile NVR via 3/4G, wifi, and drones etc.

Demonstrations will be running every day of the event at 10:00am-12:00pm and 2:00pm-5:00pm.

Suzhou Keda Technology, Facial Recognition
10:00 - 16:00 C400
session
Pre-sales Technical Engineer
Suzhou Keda Technology
Pre-sales Technical Engineer
Suzhou Keda Technology
Mobile Solution Technical Director
Suzhou Keda Technology
Pre-sales Technical Engineer
Suzhou Keda Technology

We developed facial recognition based on deep learning at the edge + cloud computing with CPU/GPU server to do facial&human recognition, fast alarm trigger and multi-search (picture search picture&videos, smart search etc.)

Demonstrations will be running throughout the event at 10:00am-12:00pm and 2:00pm-5:00pm.

PAC GDX , PAC8 app-based door controller
10:00 - 16:00
session
Product Manager
Stanley Black & Decker

Discover a flexible 8-door solution to access control with the PAC8 app-based door controller. Perfect for small to medium-sized businesses, PAC8 only uses a smartphone or tablet to add tokens, set time profiles, organise access groups and much more, without the hassle of a PC. Let our dedicated team show you how PAC8’s huge range of useful features has helped us become finalists in both the PSI awards and Benchmark awards for Access control product of the year.

Demonstration times TBC.

Concept Smoke Screen, Securevault, Smartbox, Titanium range
10:00 - 16:00
session
Concept Smoke Screen
Concept Smoke Screen
Concept Smoke Screen
Concept Smoke Screen
Concept Smoke Screen

ANT in control software and systems are designed from the ground up to not only be open platform architecture but also to integrate seamlessly with one another. Discover a system comprised of Ant in control certified software and components provides total control and visibility across even the largest of deployments. Guaranteed availability of critical defences is assured.

Demonstrations will be rolling throughout the event and can be requested on demand.

CSL, CSL Router
10:00 - 16:00 Stand E410
session
Strategic Product Manager
CSL
Key Accounts Manager Midlands & North
CSL
Key Accounts Manager North
CSL
Key Accounts Manager South
CSL

The CSL Router provides Installers with a rapid deployment opportunity for CCTV, HVAC, Electronic Article Surveillance, Access Control, Payment Terminals and many more applications. At IFSEC 2018, Installers will be able find out just how easy it is to install the CSL Router for instant 4G connectivity for a device. The pre-configured Router can overcome the logistical challenges and cost implications associated with getting a wired broadband service in place. Alternatively, it can upgrade and fully encrypt an existing wired broadband service with the addition of a backup 4G SIM. We’ll show installers just how easy it is to connect the CSL Router to a device via a Mobile Network, a Cable or Wi-Fi. Visit CSL on Stand E410 at IFSEC 2018 to discover more.

Demonstrations will be rolling throughout the event and can be requested on demand.

DORLET, DASSnet
10:00 - 16:00
session

This demo will show the different security systems that can be integrated into DASSnet® security platform.

  • Security systems integration
  • Software integration
  • Communications integration
  • BMS integration
  • Solutions applied to
  • Access control
  • Visitors management
  • Assets control

Demonstrations will be rolling throughout the event and can be requested on demand.

Genetec, Security Center Synergis
10:00 - 16:00 Stand C200
session

Learn how Access Control can heighten the security of your organization and increases your readiness to respond to incidents and threats, while leveraging any existing network and security equipment investments.

Demonstrations will be rolling throughout the event and can be requested on demand.

Genetec, Genetec Clearance
10:00 - 16:00 Stand C200
session

Learn how to speed up investigations by allowing you to securely collect, manage, and share evidence from different sources.

Demonstrations will be rolling throughout the event and can be requested on demand.

Genetec, Genetec Mission Control
10:00 - 16:00 Stand C200
session

View how you can provide your organisation with new levels of situational intelligence, visualization, and complete incident management capabilities.

Demonstrations will be rolling throughout the event and can be requested on demand.

Huawei, Huawei Software Defined Smart Camera
10:00 - 16:00 Stand C110
session
Technical Expert
Huawei
Technical Expert
Huawei
Technical Expert
Huawei

Compared with traditional cameras, Huawei's newly released software-defined cameras(SDC) are equipped with artificial intelligence chips and have an innovative architecture design. The SDC OS and SDC Controller are the cores for flexible and efficient management of intelligent analysis algorithms.

Demonstrations will be rolling throughout the event and can be requested on demand.

Hikvision
10:00 - 16:00 Stand D300
session
Product Manager
Hikvision

Hikvision will be demonstrating a wide range of products, with a strong focus on AI. Within the area of AI you can learn about: flow analysis and queue management cameras; the DeepinMind NVR which has huge analytics capabilities; DeepinView Cameras which can be used for behaviour analysis and falling detection; DeepinView facial recognition; Thermal AI.

HikCentral will be another major focus of Hikvision’s Show Me How demonstrations. This is a Video Business Intelligence (VBI) solution which provides features such as facial recognition, face matching and searching, and people counting analyses. It extracts information from a database and generates reports to assist your business operations. It integrates with access control, entrance & exit automation with ANPR, and alarm management.

In addition to AI solutions, HikCentral, you can also request demos for many other Hikvision products and solutions, in areas including: thermal cameras; intelligent traffic systems; Turbo HD solutions; access control and intercoms; Easy IP; Multi-sensors – PanoVu PTZ; Darkroom Darkfighter X and mobile solutions.

Demonstrations will be delivered by UK Product Manager, Menson Qu, and his team of product specialists.

IDIS, IDIS Direct IP
10:00 - 16:00
session
Senior Technical Manager
IDIS
Inside Technical Sales Executive
IDIS

DirectIP is the IDIS flagship end-to-end IP surveillance offering that will include a range of new NVRs and cameras due to be launched at IFSEC.  In addition, the below are exciting new products that will be launched at IFSEC 2018.

  • IDIS VGA/HDMI Encoder – Integration of multiple applications all from a single monitor
  • IDIS Ruggedized Mobile NVRs – A complete surveillance solution for transportation
  • IDIS Smartphone Cam App  – Enables your smartphone to become an integral part of your surveillance solution.

Visitors will be shown how to simply and quickly install an extensive line up of IP cameras and NVRs to build a complete IDIS DirectIP surveillance solution that is popular for its zero configuration and enhanced user experience. IDIS staff will also demonstrate:

  • The totally cost-free IDIS VMS, IDIS Center, which enables the implementation of centralised monitoring at up to 50% cheaper when compared to server-based systems
  • How DirectIP can increase installer’s margins and deliver an industry-leading low total cost of ownership for end users.

Other hands-on demonstrations available will focus on new, innovative and highly cost-effective solutions.

  • The HE-1101 VGA/HDMI Video Encoder allowing oversight and recording of multiple applications by simply connecting hardware that has a VGA or HDMI output to integrate video, access control, building management, intruder, fire and point of sale (PoS) systems.

Demonstrations will be rolling throughout the event and can be requested on demand.

Vanderbilt, ACT365 Cloud-Based Access Control
10:00 - 16:00 Stand F305
session
Product Marketing Manager
Vanderbilt
Product Manager
Vanderbilt
Product Manager
Vanderbilt
Access Control Sales Representative
Vanderbilt

Visitors to Vanderbilt’s “show me how” demonstrations will learn how to get the best out of our award-winning and leading products.

ACT365 is one of our award-winning products that visitors can enquire about at IFSEC. ACT365 is a cloud-based, complete access control and video management solution that allows installers to remotely manage multiple customer sites. We will show you how this is done.

12:00 Find out more about PSaaS solution, ACT365

15:00 An inside look at Vanderbilt's latest access control developments

Manything, Manynthing Pro app
10:00 - 16:00 Stand C108
session

The Manything Pro app was launched at ISC West in Las Vegas in April, but we’re launching some brand new updates at IFSEC. We’ll be telling attendees about our new payment platform which allows them to add recurring revenue to their business by selling cloud storage plans to their customers, without the hassle of handling recurring billing. We’ll also be demo-ing our new white label app which gives installers and distributors a chance to have our software in their own brand.

We’ll be demonstrating how installers and distributors can add cloud to their camera installations and generate a new source of recurring revenue. We’ll show attendees how to add cloud to camera in under 5 minutes through our simple smartphone app, and how their customers can view and control cameras remotely. We’ll also show our white label app which allows installers and distributors to have our software in their own brand.

Demonstrations will be rolling throughout the event and can be requested on demand.

Vanderbilt, Access Control
10:00 - 16:00 Stand F305
session
Product Marketing Manager
Vanderbilt
Access Control Sales Representative
Vanderbilt

Visitors to Vanderbilt’s “show me how” demonstrations will learn how to get the best out of our award-winning and leading products.

The latest version of ACT Enterprise will be demonstrated at IFSEC. The latest features to this access control solution include a smartphone app, a rules mapping engine and PoE Ultra, plus integration.

12:00 Find out more about PSaaS solution, ACT365

15:00 An inside look at Vanderbilt's latest access control developments

Princeton Identity, Access200, Biometric Iris Recognition
10:00 - 16:00 Stand F122
session
Princeton Identity
Princeton Identity
Princeton Identity
Princeton Identity
Princeton Identity

The process of biometric enrolment and authentication of one’s iris for identity management.

Demonstrations will be running throughout the event, and can be requested on demand.

Trackforce, m-Post and Post (desktop & mobile apps)
10:00 - 16:00 Stand G310
session
Customer Success Manager
Trackforce
Project Director
Trackforce

Trackforce solutions not only takes guard tours and activity reporting to the next level KPIs provide full visibility into the security situation to be able to identify threats and reduce security risks.

Demonstrations will be running throughout the event, and can be requested on demand as well as scheduled in advance by contacting [email protected].

BT Redcare, Show Me How the future of Alarm Signalling will look
10:30 - 15:30 Stand F210
session
Head of Product and Portfolio
BT Redcare

This session will be running on all 3 days at 10:30am, 1:00pm & 3:00pm on BT Redcare's Stand.

BT Redcare, Show Me How to configure pin input on a Redcare Secure
11:00 - 11:30 Stand F210
session
North Regional Technical Manager
BT Redcare
South Regional Technical Manager
BT Redcare

This session will be running on all 3 days at 11:00am on BT Redcare's Stand.

Vanderbilt, SPC Intrusion Detection Solution and SPC Wireless Range
11:00 - 12:00
session
Product Manager
Vanderbilt
Product Manager
Vanderbilt

Visitors to Vanderbilt’s “show me how” demonstrations will learn how to get the best out of our award-winning and leading products.

Visitors can find out all about SPC Connect, the hosted cloud-based intrusion solution designed to monitor, manage, and maintain SPC panels remotely from any location.

Our newest range of SPC Wireless detectors will be available for visitors to learn about. This brand-new product is designed to EN standards, comes with enhanced battery life, and is configurable over the air.

11:00 Enable your security team with cloud solutions, SPC Connect & SPC Wireless

ANIXTER, Best practice cabling for widely-dispersed locations
11:00 - 11:25 Stand E400
session
Advanced Technology Solutions Manager
ANIXTER

This hands-on session will take you through the current best practices of fibre cable installations, including proper termination techniques, cleaning and inspection procedures, compliance requirements and more.

BT Redcare, Show Me How to make the best use of the BT Redcare 24/7 Technical Helpdesk - introducing SightCall
11:30 - 14:00 Stand F210
session
Technical Manager
BT Redcare

This session will be running on all 3 days at 11:30am & 2:00pm, as well as 4:00pm on Tuesday and Wednesday on BT Redcare's Stand.

ANIXTER, Control room display solutions for informed, rapid decision-making
11:30 - 11:55 Stand E400
session
Sales Director Energy, Utilities & Security Verticals EMEA, NEC
ANIXTER
Manager, Software Solutions & Future Technologies, EMEA, NEC
ANIXTER

Learn how integrating 4K digital surfaces helps to visualise and analyse big data, improving the decision-making capability and performance of security staff.  We'll show you a range of future-proof, data-driven technologies and applications which can be adapted to any security environment or requirements.

BT Redcare, Show Me How BT Redcare is preparing for the digital switchover
12:00 - 15:00 Stand F210
session
North Regional Technical Manager
BT Redcare

This session will be running on all 3 days at 12:00pm & 2:30pm on BT Redcare's Stand.

ANIXTER, How Uninteruptible Power Supplies Hold the Key to Your Security System Resilience
12:00 - 12:25 Stand E400
session
Advanced Technology Solutions Manager
ANIXTER

Attendees will learn how to deploy a UPS, understand the relationship between battery size vs run time, how to test, measure and monitor power consumption, identify power drain causes and more.   All key to minimising security system downtime. 

BT Redcare, Show Me How to set up for Extended Format Signalling (SIA and CID) on Redcare Secure
13:30 - 14:00 Stand F210
session
North Regional Technical Manager
BT Redcare
South Regional Technical Manager
BT Redcare

This session will be running on all 3 days at 1:30pm on BT Redcare's Stand.

ANIXTER, Fast, Reliable Surveillance Camera Connectivity Using Powered Fiber
14:00 - 14:25 Stand E400
session
Advanced Technology Solutions Manager
ANIXTER
Data Center Solution Architect, EMEA
Commscope

Installing HD cameras and other network-access devices can often be challenging, especially in outdoor spaces, where distance limitations, power availability and device placement complicate network planning. This session will introduce a new, practical solution in the form of Powered Fiber-- a complete “rack to device” solution for powering and communicating with network devices.  Come and learn techniques and tips for reducing camera install time and costs using this exciting new technology. 

ANIXTER, Delayed Exit Access Control Systems: What You Need to Know About Safely Delaying
14:30 - 14:55 Stand E400
session
Commercial Leader, UK & Ireland
ALLEGION

Can you maintain security while still ensuring emergency escape?  Controlling access and egress is essential to maintaining security, but if the worst happens, we need to ensure that buildings can be evacuated quickly and safely. Delayed exit access control systems can be applied in healthcare, retail, education, leisure, and many other public facilities and venues. Find out what you need to know about specifying and deploying delayed exit emergency escape systems from one of the industry's leading providers.

ANIXTER, Fire Regulations for Network Cabling: Are you CPR-Compliant?
15:00 - 15:25 Stand E400
session
Advanced Technology Solutions Manager
ANIXTER

The grace period for EU CPR compliance expired last year.  Are you and your company CPR-Compliant? Find out what you need to know in this fast-paced swot-up session.

BT Redcare, Show Me How to configure Redcare Secure for IP
15:30 - 16:00 Stand F210
session
North Regional Technical Manager
BT Redcare
South Regional Technical Manager
BT Redcare

This session will be running on all 3 days at 3:30pm on BT Redcare's Stand.